ELEGIANT 2-in-1 Bluetooth 5.0 Transmitter Receiver with 3.5mm AUX Stereo Output

Description

Box seal is broken but unit is new and unused.
ELEGIANT 2-in-1 Bluetooth 5.0 Transmitter Receiver with 3.5mm AUX Stereo Output Dual-Link Support aptX Low Latency | BTI-030
Features
2-in-1 Transmitter & Receiver
: BTI-030 can be used as either transmitter or receiver. In TX mode, connect the BTI-030 to the audio output device to make the TV/computer/iPad stream audio to Bluetooth speakers or headphones. In RX mode, it can stream music from mobile devices to home stereo or wired speakers. Simply upgrade and modernize old audio equipment.
Bluetooth 5.0 & aptX Low Latency
: Enhanced Bluetooth 5.0 technology ensures faster transmission and more stable connections within 33ft working range. aptX low latency achieves end-to-end audio transmission without lip sync delay.
Note: aptX-LL requires your receiving headphones/speakers must also support aptX low latency codec.
Convenient Dual Link Support
: Supports simultaneous pairing with 2 Bluetooth headsets/speakers in TX mode, or pairing with 2 mobile devices in RX mode to achieve streaming audio.
6-8 Hours Long Battery Life
: Built-in 300mAh battery provides up to 8-hours non-stop audio in RX mode, and 6-hours stream in TX mode. Auto pairing with the last device makes it easy for repeated use.
Easy to Use
: One-button switching TX/RX mode and one-button MFB design make the operation easier. The smart indicator clearly shows the pairing status and the number of paired devices (blue means 1, green means 2) so that you can clearly know the working status of the BTI-030.
Package Includes
BTI-030 Bluetooth Transmitter & Receiver *1
3.5mm audio cable *1
Micro USB charging cable *1
User manual *1
Specifications
Bluetooth Chip:
CSR57E6
Bluetooth Version: Bluetooth 5.0
Battery Capacity: 300mAh
Working Time: TX>6H, RX>8H
Charging Time: About 2H
Input Voltage: DC 5V
Working Range: 10m/33ft (Open area without signal interference and obstruction)
Input/Output Connection: 3.5mm AUX
Audio CODEC (TX) : aptX-LL, aptX, SBC
Audio CODEC (RX) : aptX-LL, aptX, SBC, AAC
Operation Instructions
Transmitter Mode
: When used as a Bluetooth transmitter (TX mode), we recommend that you first turn on the headset/audio device and be in the Bluetooth waiting state. Then hold pressing the MFB button for about 9s, until the indicator light flashes blue quickly. At this time, the BTI-030 is in pairing state, and it will automatically search and connect to your Bluetooth headset/speaker.
Receiver Mode
: When used as a Bluetooth receiver (RX mode), hold pressing the MFB button for about 6s until the indicator light flashes in red and blue alternately. At this time, the BTI-030 is in pairing state, and you can use mobile device to search and get connected (BT name: ELEGIANT BTI-030)
Note
If you want to switch it from one mode to another, please turn it off for 5 seconds before switching to TX/RX mode, and restart.
If you want to pair the TV with a Bluetooth headset or Bluetooth speaker, please make sure that the TV has a 3.5 mm audio output port before ordering. It cannot be plugged into the AV output of the TV, otherwise it will make noise and you will not hear clear sound.