Hytera PD502 VHF Portable

Description

Hytera PD502 VHF Used Portable
Includes:battery, speaker microphone, antenna (147-160 mHz), dust cover, belt clip, charger
The Hytera PD502 is an open-standard DMR, portable UHF radio capable of providing quality voice communication in a design approved to IP54 and MIL-STD 810 testing. The Hytera-patented pseudotrunking maximizes channel usage and the long lasting battery life yields approximately 16 hours under a 5-5-90 duty cycle in digital mode. The PD5 Series is the ideal solution for organizations looking for a cost-effective way to migrate to clear digital
communication.
Pseudo Trunk
This virtual trunking feature allocates a free timeslot for urgent communications. This effectively  enhances frequency efficiency and allows you to communicate in a timely manner in emergency situations.
DMO True 2-Slot
In direct mode, Hytera PD502 can provide 2-slot communication, which allows for 2 talk paths on 1 frequency.
Smaller, Sleeker, Lighter
This portable UHF radio is 4.53 x 2.13 x 1.06 inches, weighing 9.7 oz.  The PD562 is 4.53 x 2.13 x 1.18 inches, weighing 9.9oz. The PD5 Series has dual- color injection molding.
Long Battery Life
In digital mode, the Hytera PD502 can operate for approximately 16 hours under a duty cycle of 5-5-90.
Rugged & Reliable
Complies with MIL-STD-810 C/D/E/F/G standards and is IP54 (5: Generally protected against dust; 4:  Protected against the effects of light rain or minor water splashes) ensuring outstanding performance.
Advanced Signaling
Supports multiple advanced analog signaling modes, including HDC1200, 2-Tone and 5-Tone, providing better integration into existing analog radio fleets.
Secure Communication
Provides basic digital encryption and Scrambler feature in analog mode.
DMRA Data Service
The data protocol is fully compliant to the DMRA standard.
One Touch Call/Text
Supports One Touch features that include Preprogrammed Text Messages, Voice Calls and Supplementary Features.
Supplementary Features (Optional License Upgrade)
This portable UHF radio can decode radio enable, radio disable, and remoter monitor, as well as Priority Interrupt.
Dual Mode: Analog & Digital
Dual modes operation allows the programming of both analog to digital migration.
General data
Frequency range
VHF: 136 - 174 MHz
UHF: 400 - 470 MHz
Channel capacity
32
Number of zones
3
Channel spacing
12.5/20/25 kHz
Operating voltage
7.4 V
Battery
1500 mAh Li-Ion
Battery service life(5-5-90 duty cycle)
approx. 11 hours (analog)
approx. 16 hours (digital)
Frequency stability
±0.5 ppm
Antenna impedance
50 Ω
Dimensions (H×W×D)
4.53 x 2.13 x 1.06 inches
Weight
9.17oz
Transmitter
RF Power Output
VHF: 1 / 5 W
UHF: 1 / 4 W
FM Modulation
(Analog Emissions Designator)
11 KΦF3E at 12.5 kHz
14 KΦF3E at 20 kHz
16 KΦF3E at 25 kHz
4FSK Digital Modulation
(Digital Emissions Designator)
12.5 kHz (data only): 7K6ΦFXD
12.5 kHz (data and voice): 7K6ΦFXW
Conducted/Radiated Emission
-36 dBm < 1 GHz
-30 dBm > 1 GHz
Modulation limiting
±2.5 kHz at 12.5 kHz
±4.0 kHz at 20 kHz
±5.0 kHz at 25 kHz
FM Hum & Noise
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Adjacent channel selectivity
60 dB at 12.5 kHz
70 dB at 20/25 kHz
Audio Response
+1 dB to -3 dB
Audio Distortion
≤ 3%
Digital vocoder type
AMBE++ or SELP
Digital Protocol
ETSI-TS102 361-1, 2&3
Receiver
Sensitivity (analog)
0.22 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)
Sensitivity (digital)
0.22 μV / BER 5%
Adjacent channel selectivity
TIA-603
ETSI
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
Intermodulation
TIA-603
ETSI
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
Spurious response rejection
TIA-603
ETSI
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
Hum and noise
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Nominal audio power output
0.5 W
Nominal audio distortion
≤ 3 %
Audio sensitivity
+1 dB to -3 dB
Conducted spurious emission
< -57 dBm
Environmental Specs
Operating temperature range
-30 °C to +60 °C
Storage temperature range
-40 °C to +85 °C
ESD
IEC 61000-4-2 (level 4)
±8 kV (contact discharge) ±15 kV (air discharge)
Protection against dust and moisture
IP54
Shock and vibration resistance
MIL-STD-810 C/D/E/F/G
Relative humidity
MIL-STD-810 C/D/E/F/G
FCC licenese may be required to operate.
Programming software and cables required to program and are not included.