-40%

LSI HBA330 W/ CABLES SAS3008 9300-8i IT MODE ZFS PC UNRAID TRUENAS DELL 12Gb/s

$ 94.51

Availability: 50 in stock
  • Modification Description: Flashed to IT Mode (HBA330)
  • Custom Bundle: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Type: HBA
  • Restocking Fee: No
  • Condition: New
  • Modified Item: Yes
  • Number of Ports: 2 Port SFF 8643 (Connect 8 Hard Drives)
  • External Interfaces: SAS III
  • Network Ports: SAS
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • MPN: J7TNV,DELL EMC,HBA330
  • Brand: LSI
  • Compatible Port/Slot: PCI Express 3.0 x8
  • Item must be returned within: 30 Days
  • Internal Interfaces: SAS/SATA
  • Product Line: PERC/ENTERPRISE/SERVERS
  • Model: 4Y5H1/75D1H/J7TNV H330/HBA330

    Description

    The array card is 8I, and 8 disks can be connected through the data cable. If you want to expand more hard disks, you need a hard disk cage or a hard disk backplane.
    For example, if you want to expand to 12 disks, 24 disks, or 36 disks, you need a backplane.
    SAS2008 controller: the first generation controller pcie 8X 2.0 bus bandwidth, with PowerPC 440 processor 533MHz main frequency
    SAS2308 controller: the second generation controller pcie 8X 3.0 bus bandwidth, with PowerPC 440 processor 800MHz main frequency
    9205-8I 9217-8I 9207-8I are all LSI SAS2308 chips, the appearance is the same.
    9205-8I is the HP version, it supports IT pass-through mode by default, and can be directly connected to the SAS SATA hard disk through the data cable, suitable for home PC desktop hard disk expansion
    The default array mode of LSI 9217-8I supports RAID0 1 10 and other array modes. Our shop has 9217-8I with IT pass-through.
    LSI 9207-8I defaults to IT pass-through mode, which can be used directly when plugged into the motherboard. It generally supports home PC desktop hard disk expansion SAS SATA
    9207-8i Sometimes after the driver is opened, the hard disk still cannot be seen in the management interface. This may be because the firmware version of the array card is too low, just a little upgrade.
    It is the same in ESXI6.7, and the firmware must be upgraded to a high level before it can be directly applied to the hard disk.
    The power consumption of the card is 10W
    feature
    Product name: SAS9217-8I array card
    Product model: SAS9217-8I
    Interface type: PCI-E X8
    The main chip of the product: LSI2308
    Transmission speed: 6GB/S.
    Mini interface: Mini-SAS SFF8087 connector
    Internal SATA + SAS 6Gb/s port
    8 channels, Express PCI 3
    Two X4 internal Mini-SAS SFF8087 connectors
    6Gb/s SAS LSISAS2308 controller
    Integrated RAID (0,1 and 1E 10)
    Ultra-thin design, supports up to 256 SAS or SATA terminal devices
    Support SSD, HDD and tape devices
    Fusion-MPT 2 architecture can reach more than 700,000 I/O times per second
    Support mainstream operating systems, equipped with standard drive disks.