Motorola XTS5000 800mhz M3 W/FPP, Impres Battery And Charger Upgraded Flash

Description

Motorola XTS5000 800mhz Model 3 with FPP, DES-OFB/XL encryption, latest firmware, and an excellent flashcode. Set includes radio,
old stock Impres battery NTN9862A that has and at least 1900 mAH
capacity
, new aftermarket 800 MHz whip antenna and used Impres charger WPLN4114AR.
Will come ready for you to program conventional channels directly from the keypad. Currently setup for 15 zones 16 channels each for a total of 240 channels that you can program. You will also be able to program a single 15 channel scan list directly from the keypad as well. I generally ship within one business day. Lead time for these is just set to 3 days in case someone needs me to adjust the programming. If you want a different flashcode loaded just send me a message.
Model Number: H18UCH9PW7AN
Firmware: R20.50.07
DSP: R19.50.01
Secure Version: R05.02.02 (or greater)
DES-OFB/DES-XL
Flashcode: 5A0001-101304-6
Q806: ASTRO IMBE Digital Operation
H14: Enhanced Digital ID Display
Q52: Federal Government FPP
Q498: Hardware Multikey Encryption w/ OTAR
H35: Conventional Systems Operation
G857: FDNY Emergency RX/TX Tone Set
Q947: APCO Packet Data Interface
Q53: FCC FPP And Radio Cloning
Q387: Conventional Voting Scan
Q667: ADP Software Encryption
By default switches and buttons/display are programmed as follows:
ABC Switch: A keypad locked B&C keypad unlocked
Concentric Switch: Scan On/Off
Emergency Button: Volume Set Tone
Top Side Button: Open Squelch/Monitor
Middle Side Button: Scan Nuisance Delete
Bottom Side Button: TA/Direct
Display Buttons (in order): ZONE FPP BATT MUTE CLCK CLON PROG VIEW PWR TXIN NUIS
If you'd prefer things setup a different way
feel free to send me a message. I can also reflash the radio to be used on a P25, SmartZone or SmartNet system without the FPP option free of charge.