Precisetool G454 GO-NO GO Gage for Deutsch Crimper HDT-48-00

Description

Used for testing the indenter working diameter of crimping tools;
Go and No Go gauge integration for convenient use;
Accurate identification & replaceable gage pin to prevent misfit of gage pin;
Small size, easy to carry, convenient to outdoor use.
Intender Working Dia (in/mm): GO: 0.0330 (0.84) - NO-GO: 0.0385 (0.98)
Detailed Information
Brand: PRECISETOOL
Standard: /
Model: G454
Match Tool: YJQ-W2DT
Material: GCr15
Intender Working Dia (in/mm): GO: 0.0330 (0.84) - NO-GO: 0.0385 (0.98)
Color:multicolor
Weight (g): 15
Additional Information
G454 GO-NOGO Gage is a measuring tool. Each crimp tool has accurate indenter working diameter. The gage is necessary to ensure the crimp tool is in proper working status before using or after being used for a certain period of time.
Instructions
1.Operate the tool to the fully closed working position. Set the crimp tool to the correct selector number
2.If the “GO” gage end (Green) can pass freely, but the NO-GO end (Red) can not pass completely, it means the tool is still qualified
3.If the “GO” gage end (Green) can not pass, but the NO-GO end (Red) can pass completely, it means the tool is not qualified
Maintenance
1.After using, the gage should be put into the special tool box to prevent the bending deformation of the gage pin.
2.Regularly wipe with antirust oil to ensure that the surface of gage pin is clean.