True Hi-Fi aptX NFC Bluetooth 5.1 Audio Receiver COAX replacing Audioengine B1

Description

CUSTOMIZE YOUR BLUETOOTH ID
(Please leave it in your order notes)
Unlike most other Bluetooth receivers, we offer the possibility to customize your Bluetooth ID to anything you want!
Please just make sure that when you place your order you clearly state your preferred ID in the order notes. Once the package leaves our factory you will not be able to change it.
PRODUCT HIGHLIGHTS
Perfect CD Quality Sound
with aptX that is the advanced Bluetooth codec.
100ft Range Capability
without dropouts and connection issues.
Bluetooth Version 5.1
which gives
four
times the range,
eight
times the bandwidth, and
twice
the speed.
Built-In Burr Brown DAC
audiophile grade chipset enhances audio quality and is a big plus compared to similarly priced options.
CIRRUS LOGIC CS8406:
CIRRUS LOGIC digital conversion chip for high-quality digital output.
Streams High Quality Sound
from any Bluetooth enabled phone, laptop, pc or tablet to any of your home speakers.
PRODUCT SPECIFICATIONS
Bluetooth Version:
5.1 compliant, QCC3034 Chip set;
Bluetooth Profiles:
A2DP v1.3.1, EDR
aptX HD, aptX Low Latency, aptX Classic, MP3, AAC, SBC audio codecs;
Built-In DAC:
TI / Burr Brown PCM5102A; PCM interface: 32bit, 384kHz(Max);
Supports 48kHz / 24bit LPCM audio data;
DAC SNR(Typical):
112dB;
Receiver sensitivity (basic rate, typical):
– 90dBm;
Audio Input:
Bluetooth only;
Audio Outputs:
Analog Stereo RCA, Digital TOSLINK Optical and SPDIF Coaxial;
Power Supply:
DC 5V 0.5A-3A USB power adapter required (
NOT INCLUDED
)
FREQUENTLY ASKED QUESTIONS
Is the Bluetooth always on when the unit is powered on, or does it go to sleep? And are all 3 outputs active at the same time?
Yes, always ON, no sleeping mode;
Yes it works. You get output from analog, SPDIF and TOSLINK at the same time.
Is this version also a Bluetooth Audio Transmitter?
This is simply a Bluetooth receiver!
Can you rename the BT device? I want to connect several of these to a multi-zone whole house audio amp & want to know to which zone I am sending.
Yes, we are able to customize the “BLUETOOTH ID” for pairing instead of the default "B1" ID. Just leave us a note when ordering.
Can you have two identical HIFI Bluetooth music audio receivers in one household?
Yes, but ideally they should have different Bluetooth IDs. BluDento are able to customize the “BLUETOOTH ID” for pairing instead of the default "B1" ID. You had better leave us a note right after ordering.
If you use the optical out, does it bypass the DAC?
Yes, digital outputs: Optical & Coaxial bypass the on-board DAC.
Do you have a comparison of your BLT-HD version vs BLT-2 version? What are the primary differences?
B1, B2, BLT-2 and BLT-HD are AAC, SBC, aptX, aptX Low Latency supported;
BLT-HD is LDAC supported but others NOT;
B1 is NFC-enabled but others NOT.
What is the max VRMS level of the L & R channels outputs?
2.12V at 50HZ at 0dB.
Does the power supply adapter come in the box? If not how do I get it?
No, Any 5V USB charger it's fine.
How many A (amps) minimum does the USB power adapter need to be for this unit?
Min 0.5A.
How many Bluetooth devices can simultaneously stream to this device?
Only one.
How many source devices can be connected at the same time?
Two.
I have multiple phones/tablets/laptops. I can't tell which is currently connected to the device. How can I force-pair the one I have in my hand?
You have to do it manually.
Does it have a on/off button or auto-on when power is connected? And will it remember the connected device when it comes back on after power was cut?
It doesn't have a on/off button; Yes it searches for previously paired Bluetooth devices when powered up.