Wireless Bluetooth Receiver 3.5mm Aux Stereo Audio Music Car Adapter Transmitter

Description

Product Features:
Supports wireless: Handsfree
Supports wireless stereo music play
Echo cancellation and noise suppression (CVC) technology.
Automatic power-off memory function
Direct access audio input
Disconnect, 3 minutes can automatically shut down
Package Includes:
1 x Bluetooth Music Receiver.
1 x Micro USB Power Cable.
1 x 3.5mm Audio Connector.
1 x User Manual.
How To Use:
1. Power ON/OFF
1. Power on: Press and hold the ON/OFF button for 3 seconds until the blue LED light starts flashing.
2. Power off: Press and hold the ON/OFF button for 5 seconds. The red LED will light up, and then turn off.
2. Pairing
1. To enter into pairing mode, press and hold the ON/OFF button for 5 seconds until both red and blue LEDS flash.
2. Search for the music receiver on your mobile device or compatible transmitter. Touch and hold one button to power on and it will automatically search for a compatible transmitter; There is no codes needed to enter if connected with a Apple or Android device. LED lights beneath the button indicate device and charging status.
3. The devices should now recognize each other and pair. The LED on the music receiver will slowly flash blue after successful paring.
4. To complete pairing, some devices require a pass key or code; Please enter "0000".
5. Once successfully paired, the devices can be powered off. To re-connect simply power them both on, no need to pair again.
NOTE: If you wish to use the music receiver with another transmitter you must restart the pairing process with the new devices from step one. After pairing the new transmitter, the old transmitter will no longer be paired to the music receiver, you can have only one device connected at a time.
3. Playing Music
1. Using the supplied audio cables and adapters, connect the music receiver to the auxiliary(AUX) input of your home or car stereo.
2. Make sure the transmitter (Mini-jack, mobile phone, PC, PAD OR compatible source) is turned on and paired with the music receiver and that the devices are no more than 10m apart.
3. The blue LED on the music receiver will flash slowly, indicating a connection.
4. Press "play" and the music will be sent wireless to the music receiver.
Note: If you cannot hear the music:
- Make sure your stereo system is set to "AUX" input or whichever input is the corresponding input to the music receiver.
- Check and make sure the volume is not turned down or muted.
4. Charging
1. Using the supplied USB cable, connect the small end to the mini-USB input of the music receiver.
2. Connect the other end to the USB input of your PC, laptop or USB power converter, The music receiver's LED light will glow red during charging.
3. When charging is finished, the red LED will turn off.
5. Hands-free
- Default your phone using Bluetooth microphone, telephone access to the speakerphone comes MIC.
- Phone calls, you can press the key (button1) to open to answer a voice call.
- After the completion of the call, the phone cuts into the state before automatically.
- Disconnect after one minute, the Bluetooth device will shut down.